Bambu Lab PLA Pure
Five ingredients, every one EU food-contact certified
Low indoor printing emissions, certified to UL GREENGUARD 2904
Safe for kids to play with, certified to EU toy-safety standards (EN 71)
Filaments in this series
1.75 mm
1000 g
1.24 g/cm³
335 m
190–230 °C
35–65 °C
1
$24.99
Drying: Blast Drying Oven: 50 °C, 8 h
Material properties · 53 fields
Inherited from PLA.
Printing requirements
195-220 °C
Off, 40-60°C
Max 100%
Off
Ambient (20-35°C)
Low
Open Window / Room Ventilation
Dilutes airborne contaminants but doesn't filter them.
1
Optional (Brim)
Optional
Not needed
40-50 °C for 4-6 h
Printing characteristics
Consistentⓘ
Low
0.2-0.6 %
Moderateⓘ
Easy
Goodⓘ
Excellentⓘ
Lowⓘ
Lowⓘ
Moderateⓘ
150 mm/s
Low
Mild
Low
Material properties
1.24 g/cm³
Medium · 50 MPa
High · 3.50 GPa
Low · 3.0 kJ/m²
Rigid · 5% elong.
Low · 55 °C HDT
60 °C
Medium · 0.50% in 24h
Medium · 80 MPa
High · 3.60 GPa
Poor
Poor
Poor
Poor
Poor
Good
Fair
Poor
Hard 80-90D
Partial
With proper processing
Post-processing
Good
Good
Limited (Ethyl acetate)
Good
Good
Possible
Series created Jun 25, 2026 · Last updated Jun 25, 2026
Specialties
Food SafeCertified safe for touching food. No toxic heavy metals or harmful additives. For kitchen tools, food containers, or utensils. Note: Layer lines can trap bacteria, so use with caution.
Low OdorEngineered to reduce harmful emissions and smells during printing. Safer for home or office use without industrial ventilation. Most common in ABS and ASA alternatives.