Bambu Lab PPA CF
Filaments in this series
1.75 mm
1000 g
1.25 g/cm³
333 m
280–310 °C
100–120 °C
0.95
Drying: 80-100 °C for 8-12 h
Material properties · 25 fields
Inherited from PPA.
Printing requirements
290-320 °C
110°C+
Off
Off
Heated (55-75°C) · enclosure needed
High
Carbon Filtration, Exhaust Outdoors
Reduces VOCs and odors but not ultrafine particles. Removes particles and VOCs from the indoor environment entirely.
0.95
Required (Brim, Raft, Glue (adhesion), Magigoo)
Required
Required
80-100 °C for 8-12 h
Printing characteristics
0.5-1.5 %
40 mm/s
High
Material properties
1.15 g/cm³
High · 80 MPa
High · 3.50 GPa
Low · 5.0 kJ/m²
Rigid · 15% elong.
Very high · 130 °C HDT
110 °C
Medium · 0.50% in 24h
High · 110 MPa
High · 3.50 GPa
Series created Jun 4, 2026
Specialties
High TemperatureWithstands extreme heat (150°C+) for industrial, aerospace, and engine-adjacent applications. Requires specialized high-temp printers (300°C+ hotend, enclosure).
Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.
High StrengthResists bending or pulling apart under heavy load. Very stiff.
Low ShrinkagePart holds its exact shape over time. No warping, sagging, or unexpected size changes. Essential for precision parts, press-fits, and mechanisms under constant load.
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Wear ResistantResists surface wear from friction and sliding. Good for gears, bushings, conveyor parts, or any component that rubs against other surfaces.
Fatigue ResistantWithstands repeated bending without cracking. For living hinges, snap-fits, and moving parts.
UV ResistantResists degradation from sunlight exposure (UV radiation) and outdoor weather conditions. For outdoor signage, garden equipment, automotive exterior parts, or marine components.