CookieCad TPU Glitter
1.75 mm
1000 g
1.2 g/cm³
346 m
210–230 °C
30–60 °C
1.03
Drying: 40-50 °C for 6-8 h
Material properties · 49 fields
Inherited from TPU.
Printing requirements
210-230 °C
Off, 40-60°C
Medium 50%
Off
Ambient (20-35°C)
Low
Open Window / Room Ventilation, Carbon Filtration
Dilutes airborne contaminants but doesn't filter them. Reduces VOCs and odors but not ultrafine particles.
1.03
Recommended (Glue (release), Tape)
Required
Recommended
40-50 °C for 6-8 h
Printing characteristics
Variableⓘ
None
0.5-1.5 %
Difficult
Exceptionalⓘ
Poorⓘ
Moderateⓘ
Moderateⓘ
Very Highⓘ
30 mm/s
High
None
Low
Material properties
1.20 g/cm³
Medium · 35 MPa
Low · 0.03 GPa
Flexible · 450% elong.
Low · 50 °C HDT
-35 °C
High · 1.00% in 24h
Low · 0.05 GPa
Fair
Good
Excellent
Fair
Poor
Good
Fair
Exceptional
None
With proper processing
Post-processing
Poor
Poor
No
Fair
Poor
Not recommended
Series created Jun 4, 2026
Specialties
Flexible / ElasticStretches and squishes like rubber. High stretch, very soft. Returns to shape. For phone cases, gaskets, soft grips, shock absorption.
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
Wear ResistantResists surface wear from friction and sliding. Good for gears, bushings, conveyor parts, or any component that rubs against other surfaces.
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Low Friction Naturally slippery surface. Low coefficient of friction. For bearings and sliding parts.
Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.