Yellow· 3DXTech ASA 3DXMAX®
Updated Jul 7, 2026
UV ResistantHeat ResistantTough / Impact ResistantChemical ResistantVapor SmoothableSandable
Advanced
Advanced. Wants careful tuning, strong bed adhesion, and usually an enclosure.
Sign up to follow this filament
Your spools, shelves, and drying logs, all in one visual studio.
$50.00/kg
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Photos
No community photos of 3DXTech ASA 3DXMAX® Yellow yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inYour spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
3DXTech ASA 3DXMAX® Yellow Summary
This filament is tricky to print, heat-resistant and weatherproof. Worth watching: it can be a little moisture-sensitive and a bit smelly to print.
Print characteristics
Layer adhesion ExcellentBed adhesion ChallengingBridging & overhang GoodSpeed sensitivity ModerateWarping ModerateShrinkage 0.4-0.7 %Stringing LowOozing LowOdor Moderate
Strengths
- Solid strength for everyday parts
- Handles heat well
- Holds up to sunlight without fading or going brittle
- Weather-resistant for long-term outdoor use
- Layers bond strongly for clean, watertight prints
- Prints clean with minimal stringing
- Good electrical insulator
- Food-safe potential with the right setup
Things to watch
- Can warp on large or sharp-cornered prints
- Picks up moisture over time, store it with desiccant
- Gives off noticeable fumes, print with ventilation or filtration
- Fussy about bed adhesion, use a brim, glue, or a textured plate
Color & finish
A solid Yellow filament. It reads as a light, vivid yellow, close to gold.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Outdoor & Auto
Automotive partsCar interior accessoriesGarden & outdoor fixtures
Specialties
UV ResistantResists degradation from sunlight exposure (UV radiation) and outdoor weather conditions. For outdoor signage, garden equipment, automotive exterior parts, or marine components.
Heat ResistantWithstands elevated temperatures (hot car, warm electronics) without deforming. Printable on standard printers. HDT ~80-120°C.
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Vapor SmoothableReacts to chemical vapors (acetone for ABS/ASA, or other solvents) that partially melt the surface. Creates a glossy, injection-molded finish with no layer lines.
SandableEasily sanded, filed, or carved without gumming up sandpaper.
Spool Specs
1.07 g/cm³
±0.03 mm
1.75 mm
1000 g
389 m
Filament Print & Drying settings
| Nozzle temp | 235–255 °C |
|---|---|
| Bed temp | 90–110 °C |
| Flow ratio | 0.95 |
| Drying | 80 °C for 4 h |
| Moisture sensitivity | Medium |
| Enclosure | Required |
| Part cooling | None |
| Dry box while printing | Keep the spool in a dry box while printing |
More in the 3DXMAX® series
View all 10 colors
Reviews for 3DXTech ASA 3DXMAX® Yellow filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.