Magenta· 3DXTech PLA Economy
Updated Jun 25, 2026
AMS compatible
Very easy
Beginner-friendly. Prints reliably at default settings on almost any printer.
Sign up to follow this filament
Your spools, shelves, and drying logs, all in one visual studio.
$23.99/kg$17.99/kg bulk
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
3DXTech PLA Economy Magenta Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Print characteristics
Layer adhesion GoodBed adhesion ModerateBridging & overhang ExcellentSpeed sensitivity ModerateWarping LowShrinkage 0.2-0.6 %Stringing LowOozing LowOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Drying
This material is fairly forgiving about moisture. When it needs drying, run it at 40-50 °C for 4-6 h.
Compatibility
Compatible
Not Required
Max
190–220 °C
23–60 °C
Color
A solid Magenta filament. It reads as a vivid pink, close to fuchsia.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
🎨 Art & Cosplay
Display modelsFigurines & statues
🏡 Home
Drawer organizersPlanters
🎲 Gaming
Board game insertsMiniatures
Spool Specs
1.24 g/cm³
±0.03 mm
1.75 mm
750 g
251 m
Filament Print & Drying settings
| Nozzle temp | 190–220 °C |
|---|---|
| Bed temp | 23–60 °C |
| Flow ratio | 1 |
| Drying | 45 °C for 4 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
More in the Economy series
View all 14 colors
Apple Green
Brown
Chocolate Wine
Dark Blue
Dark Green
Green Fluorescent
Leaf Green
Pastel Green
Pastel Pink
Purple
Red Translucent
Sulfur Yellow
Yellow Gold
Photos
No community photos of 3DXTech PLA Economy Magenta yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inReviews for 3DXTech PLA Economy Magenta filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.