Updated Jun 26, 2026Added Jun 6, 2026
Blue Green· AMOLEN PLA Crystal Transparent
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of AMOLEN PLA Crystal Transparent Blue Green yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inAMOLEN PLA Crystal Transparent Blue Green Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Beginner
Beginner-friendly. Prints reliably at default settings on almost any printer.
Print characteristics
Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Color & finish
A solid Blue Green filament. It reads as a light, vivid blue, close to dodger blue. This filament has a translucent, light-diffusing look and a color-shifting gradient as it prints.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Decor & Cosplay
Display modelsFigurines & statues
Home & Lifestyle
Drawer organizersPlanters
Tabletop & Gaming
Board game insertsMiniatures
Specialties
TranslucentFrosted glass effect. Light passes through, but objects on the other side look blurry. Great for lampshades, signs, and diffusers
GradientThe color transitions as the print progresses. One spool can start blue and end pink, or cycle through a full rainbow.
Spool Specs
1.26 g/cm³
±0.02 mm
1.75 mm
1000 g
330 m
Filament Print & Drying settings
| Nozzle temp | 210–230 °C |
|---|---|
| Bed temp | 30–65 °C |
| Print speed | < 220 mm/s |
| Flow ratio | 1 |
| Drying | 55 °C for 8 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
| Part cooling | Max |
More in the Crystal Transparent series
View all 13 colors
Amber Yellow
Aurora Purple
Blue
Blue Purple
Blue White
Crystal Phantom Blue
Green
Haze Blue
Orange
Pink
Rainbow Nebula Glaze
Yellow Green RedReviews for AMOLEN PLA Crystal Transparent Blue Green filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.