Updated Jun 27, 2026Added Jun 6, 2026
Gold Fuchsia Green· AMOLEN PLA Silk Triple
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of AMOLEN PLA Silk Triple Gold Fuchsia Green yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inAMOLEN PLA Silk Triple Gold Fuchsia Green Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Beginner
Beginner-friendly. Prints reliably at default settings on almost any printer.
Print characteristics
Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Color & finish
This is a multi-color filament in Gold, Fuchsia, and Green. This filament has a silky, high-gloss sheen.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Decor & Cosplay
Display modelsFigurines & statues
Home & Lifestyle
Drawer organizersPlanters
Tabletop & Gaming
Board game insertsMiniatures
Specialties
SilkExtremely smooth and glossy with a satin-like sheen. Color is static and highly reflective.
TriextrusionA single spool co-extruded with three distinct colors or materials side by side, producing prints with three-toned effects that shift across the surface.
Spool Specs
1.27 g/cm³
±0.02 mm
1.75 mm
1000 g
327 m
Filament Print & Drying settings
| Nozzle temp | 210–240 °C |
|---|---|
| Bed temp | 30–65 °C |
| Print speed | < 180 mm/s |
| Flow ratio | 1 |
| Drying | 55 °C for 8 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
| Part cooling | Max |
More in the Silk Triple series
View all 15 colors
Black Blue Purple
Blue Green Orange
Blue Green Purple
Blue Purple Orange
Gold Fuchsia Black
Gold Fuchsia Blue
Gold Silver Copper
Purple / Blue Green / Burnt Orange
Red Blue White
Red Blue Yellow
Red Gold Purple
Red Green Blue
Red Purple Orange
Turquoise Coral GoldReviews for AMOLEN PLA Silk Triple Gold Fuchsia Green filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.