View

White· Bambu Lab PC FR

Name: Bambu Lab PC FR White
Brand: Bambu Lab

Bambu Lab· SKU: 63101

Flame RetardantHigh StrengthTough / Impact ResistantHeat ResistantWater Resistant / HydrophobicUV ResistantTransparent

AMS compatible

Ease of use Very hard

Demanding. Best suited to experienced makers: enclosure, precise temps, and patience.

Buy

Bambu Lab Store

Buy links may earn VisualSpool a small commission, at no extra cost to you. Details.

Your spools

Create your studio Sign in

Bambu Lab PC FR White Summary

This filament is demanding to print, strong and heat-resistant. Worth watching: it can be moisture-sensitive and a bit smelly to print.

Print characteristics

Shrinkage 0.5-0.8 %

Strengths

Strong parts that hold up under load
Tough, absorbs impact without cracking
Handles heat well

Things to watch

Soaks up moisture quickly, keep it sealed and dry before printing
Gives off noticeable fumes, print with ventilation or filtration
Fussy about bed adhesion, use a brim, glue, or a textured plate

Drying

This material is very hygroscopic, it pulls moisture from the air quickly. When it needs drying, run it at 80-100 °C for 4-24 h. Keep it in a heated dry box while printing for the cleanest results.

Compatibility

AMS

Compatible

ENCLOSURE

Required

PART COOLING

None, Low

WHILE PRINTING

Keep in a dry box

NOZZLE TEMP

260–280 °C

BED TEMP

90–110 °C

Finish

This filament has a clear, see-through look.

Specialties

Flame RetardantResists catching fire or self-extinguishes. Often UL94 rated. For electrical enclosures, automotive components, aerospace parts, or safety-critical applications.

High StrengthResists bending or pulling apart under heavy load. Very stiff.

Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.

Heat ResistantWithstands elevated temperatures (hot car, warm electronics) without deforming. Printable on standard printers. HDT ~80-120°C.

Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.

UV ResistantResists degradation from sunlight exposure (UV radiation) and outdoor weather conditions. For outdoor signage, garden equipment, automotive exterior parts, or marine components.

TransparentOptically clear. You can see fine details through the print. Very difficult to achieve true transparency with FDM due to layer lines.