Added Jun 6, 2026
Malachite Green· Bambu Lab PETG CF
AMS compatible
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of Bambu Lab PETG CF Malachite Green yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inBambu Lab PETG CF Malachite Green Summary
This filament is easy to print, weatherproof. Worth watching: it can be a little moisture-sensitive.
Easy
Easygoing. Consistent results with very little tuning.
Print characteristics
Layer adhesion ExcellentBed adhesion EasyBridging & overhang GoodSpeed sensitivity HighWarping LowShrinkage 0.2-0.8 %Stringing HighOozing HighOdor None
Strengths
- Solid strength for everyday parts
- Weather-resistant for long-term outdoor use
- Layers bond strongly for clean, watertight prints
- Stays flat, very little warping
- Good electrical insulator
- Food-safe potential with the right setup
Things to watch
- Picks up moisture over time, store it with desiccant
- Prone to stringing, tune retraction and keep the filament dry
- Oozes from the nozzle, expect some cleanup on multi-part prints
Color & finish
A solid Malachite Green filament. It reads as a green, close to light sea green. This filament has a textured matte surface from carbon-fiber fill.
Finishing
Glue-friendly
Common uses
Mechanical & Structural
Brackets
Home & Lifestyle
Cable managementHooks & hangersKitchen accessories
Outdoor & Auto
Garden & outdoor fixtures
Electronics & RC
Electronics enclosures
Specialties
Carbon FiberContains chopped carbon fibers in a base polymer (PLA, ABS, Nylon, PETG, ASA). Creates extremely stiff, lightweight, dimensionally stable parts. Matte black finish only. Highly abrasive.
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
Heat ResistantWithstands elevated temperatures (hot car, warm electronics) without deforming. Printable on standard printers. HDT ~80-120°C.
UV ResistantResists degradation from sunlight exposure (UV radiation) and outdoor weather conditions. For outdoor signage, garden equipment, automotive exterior parts, or marine components.
Low OdorEngineered to reduce harmful emissions and smells during printing. Safer for home or office use without industrial ventilation. Most common in ABS and ASA alternatives.
Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.
Spool Specs
1.27 g/cm³
±0.03 mm
1.75 mm
1000 g
327 m
Filament Print & Drying settings
| Nozzle temp | 240–270 °C |
|---|---|
| Bed temp | 65–75 °C |
| Print speed | < 200 mm/s |
| Flow ratio | 0.98 |
| Drying | 60-65 °C for 4-6 h |
| Moisture sensitivity | Medium |
| Enclosure | Optional |
| Part cooling | Medium |
| Dry box while printing | Keep the spool in a dry box while printing |
More in the CF series
View all 7 colors
Reviews for Bambu Lab PETG CF Malachite Green filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.