Added Jun 6, 2026
White· Bambu Lab PLA Aero
AMS compatible
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of Bambu Lab PLA Aero White yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inBambu Lab PLA Aero White Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Beginner
Beginner-friendly. Prints reliably at default settings on almost any printer.
Print characteristics
Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Color & finish
A solid White filament. It reads as a soft off-white. This filament has a flat, matte finish that hides layer lines.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Decor & Cosplay
Display modelsFigurines & statues
Home & Lifestyle
Drawer organizersPlanters
Tabletop & Gaming
Board game insertsMiniatures
Specialties
MatteFlat, non-reflective surface that hides layer lines. Surface feels slightly rough or chalky.
LightweightVery light, often foaming or low-density. Floats in water. Often used for RC planes, drones, and buoyant objects
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
Spool Specs
1.21 g/cm³
±0.03 mm
1.75 mm
1000 g
344 m
Filament Print & Drying settings
| Nozzle temp | 220–260 °C |
|---|---|
| Bed temp | 35–45 °C |
| Print speed | < 180 mm/s |
| Flow ratio | 1 |
| Drying | 40-50 °C for 4-6 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
| Part cooling | Max |
More in the Aero series
View all 2 colors
Reviews for Bambu Lab PLA Aero White filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.