Blue· Bambu Lab PLA Basic
Basic
AMS compatible
Refills available
Very easy
Beginner-friendly. Prints reliably at default settings on almost any printer.
Sign up to follow this filament
Your spools, shelves, and drying logs, all in one visual studio.
$12.99/kg$19.99/kg refill$10.99/kg bulk
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Bambu Lab PLA Basic Blue Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Print characteristics
Layer adhesion GoodBed adhesion ModerateBridging & overhang ExcellentSpeed sensitivity ModerateWarping LowShrinkage 0.2-0.6 %Stringing LowOozing LowOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Drying
This material is fairly forgiving about moisture. When it needs drying, run it at 40-50 °C for 4-6 h.
Compatibility
Compatible
Available
Not Required
Max
190–230 °C
35–45 °C
Color
A solid Blue filament. It reads as a dark, vivid blue, close to midnight blue.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
🎨 Art & Cosplay
Display modelsFigurines & statues
🏡 Home
Drawer organizersPlanters
🎲 Gaming
Board game insertsMiniatures
Specialties
BasicDefault finish with no special surface treatment; slight natural sheen. Prints with a slightly glossy surface and visible layer lines, and is the baseline against which all other finishes are compared.
Spool Specs
1.24 g/cm³
±0.03 mm
1.75 mm
1000 g
335 m
Filament Print & Drying settings
| Nozzle temp | 190–230 °C |
|---|---|
| Bed temp | 35–45 °C |
| Print speed | < 300 mm/s |
| Nozzle size | 0.2–0.8 mm |
| Flow ratio | 1 |
| Drying | Blast Drying Oven: 50 °C，8 h X1 Series Printer Heatbed: 60 - 70 °C, 12 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
More in the Basic series
View all 30 colors
Bambu Green
Beige
Black
Blue Gray
Bright Green
Bronze
Brown
Cobalt Blue
Cocoa Brown
Cyan
Dark Gray
Gold
Gray
Hot Pink
Indigo Purple
Jade White
Light Gray
Magenta
Maroon Red
Mistletoe Green
Orange
Pink
Pumpkin Orange
Purple+5
morePhotos
No community photos of Bambu Lab PLA Basic Blue yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inReviews for Bambu Lab PLA Basic Blue filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.