Updated Jun 8, 2026Added Jun 6, 2026
Dark Magic TPU 95A· CookieCad TPU Elixir
Dark Magic is a deep black with a green-blue-purple shimmer.
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of CookieCad TPU Elixir Dark Magic TPU 95A yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inCookieCad TPU Elixir Dark Magic TPU 95A Summary
It is the same shade as CookieCad's Dark Magic PLA, PETG, and ABS. Just note that, side by side, they will look a little different due to differences in material properties.
Moderate
Moderate. Prints well once temperature, cooling, and bed adhesion are dialed in.
Print characteristics
Layer adhesion ExceptionalBed adhesion EasyBridging & overhang FairSpeed sensitivity Very HighWarping NoneShrinkage 0.5-1.5 %Stringing HighOozing ModerateOdor Mild
Strengths
- Solid strength for everyday parts
- Wear-resistant for moving and rubbing parts
- Flexible and rubber-like
- Layers bond strongly for clean, watertight prints
- Stays flat, very little warping
- Food-safe potential with the right setup
Things to watch
- Soaks up moisture quickly, keep it sealed and dry before printing
- Prone to stringing, tune retraction and keep the filament dry
- Softens in heat, not for hot cars or near heat sources
- Shrinks as it cools, which can affect dimensional accuracy
Color & finish
Dark Magic TPU 95A prints in Dark Magic. It reads as a dark, muted blue, close to dark slate gray.
Common uses
Mechanical & Structural
Bushings & bearings
Electronics & RC
Drone framesRC car parts
Specialties
ShimmerFine mica powder particles that catch the light, creating a subtle or intense sparkle.
Flexible / ElasticStretches and squishes like rubber. High stretch, very soft. Returns to shape. For phone cases, gaskets, soft grips, shock absorption.
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
Wear ResistantResists surface wear from friction and sliding. Good for gears, bushings, conveyor parts, or any component that rubs against other surfaces.
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Low Friction Naturally slippery surface. Low coefficient of friction. For bearings and sliding parts.
Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.
Spool Specs
1.2 g/cm³
±0.03 mm
1.75 mm
1000 g
346 m
Filament Print & Drying settings
| Nozzle temp | 170–220 °C |
|---|---|
| Bed temp | 30–60 °C |
| Print speed | 20–40 mm/s |
| Flow ratio | 1.03 |
| Drying | 40-50 °C for 6-8 h |
| Moisture sensitivity | High |
| Enclosure | Not Required |
| Part cooling | Medium |
| Dry box while printing | Keep the spool in a dry box while printing |
More in the Elixir series
View all 2 colors
Reviews for CookieCad TPU Elixir Dark Magic TPU 95A filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.