Added Jun 6, 2026
Sparkle Clear· FlashForge PLA StandardDiscontinued
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
This filament has been discontinued. Retailers may still have remaining stock.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of FlashForge PLA Standard Sparkle Clear yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inFlashForge PLA Standard Sparkle Clear Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Beginner
Beginner-friendly. Prints reliably at default settings on almost any printer.
Print characteristics
Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Color & finish
A solid Sparkle Clear filament. It reads as a very pale gray, close to light gray. This filament has embedded glitter that catches the light and a translucent, light-diffusing look.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Decor & Cosplay
Display modelsFigurines & statues
Home & Lifestyle
Drawer organizersPlanters
Tabletop & Gaming
Board game insertsMiniatures
Specialties
Glitter Bright or translucent base with larger, visible glitter flakes. Large (0.5–2mm) particles. Distinct individual flecks; disco-ball effect.
TranslucentFrosted glass effect. Light passes through, but objects on the other side look blurry. Great for lampshades, signs, and diffusers
Spool Specs
1.24 g/cm³
±0.02 mm
1.75 mm
1000 g
335 m
Filament Print & Drying settings
| Nozzle temp | 195–220 °C |
|---|---|
| Bed temp | 35–65 °C |
| Flow ratio | 1 |
| Drying | 40-50 °C for 4-6 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
| Part cooling | Max |
Reviews for FlashForge PLA Standard Sparkle Clear filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.