Skin· Overture PLA Matte

Overture

Filament Color

Skin#F0DDC2

Buy

Overture Store Buy on Amazon

Buy links may earn VisualSpool a small commission, at no extra cost to you. Details.

Your spools

Create your studio Sign in

Photos of Skin · Overture PLA Matte

Photos

No community photos of Overture PLA Matte Skin yet.

Upload your swatch, spool or print with this filament.

Join to add a photo or sign in

Overture PLA Matte Skin Summary

This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.

Skill level Beginner

Beginner-friendly. Prints reliably at default settings on almost any printer.

Print characteristics

Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild

Strengths

Solid strength for everyday parts
Stiff and rigid, resists flexing
Stays flat, very little warping
Prints clean with minimal stringing
Food-safe potential with the right setup

Things to watch

Softens in heat, not for hot cars or near heat sources
Degrades in sunlight, not ideal for long-term outdoor use
Can be brittle, may crack under sharp impact
Wears down under friction, not for high-wear parts

Color & finish

A solid Skin filament. It reads as a very pale white, close to wheat. This filament has a flat, matte finish that hides layer lines.

Finishing

SandablePaintableVapor-smoothableMachinableGlue-friendly

Common uses

Decor & Cosplay Display modelsFigurines & statues

Home & Lifestyle Drawer organizersPlanters

Tabletop & Gaming Board game insertsMiniatures

Specialties

MatteFlat, non-reflective surface that hides layer lines. Surface feels slightly rough or chalky.

Spool Specs

DENSITY

1.3 g/cm³

TOLERANCE

±0.03 mm

DIAMETER

1.75 mm

SPOOL SIZE

1000 g

LENGTH

320 m

Filament Print & Drying settings

Nozzle temp	190–230 °C
Bed temp	50–70 °C
Print speed	60–300 mm/s
Flow ratio	1
Drying	50 °C for 7 h
Moisture sensitivity	Low
Enclosure	Not Required
Part cooling	Max