Updated Jul 10, 2026Added Jul 10, 2026
Silver· Overture PLA Silk
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos of Silver · Overture PLA Silk
Photos
No community photos of Overture PLA Silk Silver yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inOverture PLA Silk Silver Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Beginner
Beginner-friendly. Prints reliably at default settings on almost any printer.
Print characteristics
Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Color & finish
A solid Silver filament. It reads as a light, muted metallic, close to light slate gray. This filament has a silky, high-gloss sheen and a metallic look.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Decor & Cosplay
Display modelsFigurines & statues
Home & Lifestyle
Drawer organizersPlanters
Tabletop & Gaming
Board game insertsMiniatures
Specialties
MetallicShiny and reflective like polished metal. The color stays the same from every angle. Contains no metal.
SilkExtremely smooth and glossy with a satin-like sheen. Color is static and highly reflective.
Spool Specs
1.24 g/cm³
±0.03 mm
1.75 mm
1000 g
335 m
Filament Print & Drying settings
| Nozzle temp | 200–220 °C |
|---|---|
| Bed temp | 50–60 °C |
| Print speed | 30–70 mm/s |
| Flow ratio | 1 |
| Drying | 40-50 °C for 4-6 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
| Part cooling | Max |
More in the Silk series
View all 15 colors
Blue
Copper
Dual Blue Silver
Dual Green Silver
Dual Magenta Gold
Fresh Red
Gold
Gold Silver
Gray
Green
Neon Green
Purple
Red
WhiteReviews for Overture PLA Silk Silver filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.