Updated Jul 9, 2026Added Jul 9, 2026
Bright Pink· Overture TPU 95A
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos of Bright Pink · Overture TPU 95A
Photos
No community photos of Overture TPU 95A Bright Pink yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inOverture TPU 95A Bright Pink Summary
This filament is moderately demanding to print, flexible. Worth watching: it can be moisture-sensitive and low on heat resistance.
Moderate
Moderate. Prints well once temperature, cooling, and bed adhesion are dialed in.
Print characteristics
Layer adhesion ExceptionalBed adhesion EasyBridging & overhang FairSpeed sensitivity Very HighWarping NoneShrinkage 0.5-1.5 %Stringing HighOozing ModerateOdor Mild
Strengths
- Solid strength for everyday parts
- Wear-resistant for moving and rubbing parts
- Flexible and rubber-like
- Layers bond strongly for clean, watertight prints
- Stays flat, very little warping
- Food-safe potential with the right setup
Things to watch
- Soaks up moisture quickly, keep it sealed and dry before printing
- Prone to stringing, tune retraction and keep the filament dry
- Softens in heat, not for hot cars or near heat sources
- Shrinks as it cools, which can affect dimensional accuracy
Color & finish
A solid Bright Pink filament. It reads as a very pale pink.
Common uses
Mechanical & Structural
Bushings & bearings
Electronics & RC
Drone framesRC car parts
Specialties
BasicDefault finish with no special surface treatment; slight natural sheen. Prints with a slightly glossy surface and visible layer lines, and is the baseline against which all other finishes are compared.
Flexible / ElasticStretches and squishes like rubber. High stretch, very soft. Returns to shape. For phone cases, gaskets, soft grips, shock absorption.
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
Wear ResistantResists surface wear from friction and sliding. Good for gears, bushings, conveyor parts, or any component that rubs against other surfaces.
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Low Friction Naturally slippery surface. Low coefficient of friction. For bearings and sliding parts.
Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.
Spool Specs
1.2 g/cm³
±0.03 mm
1.75 mm
1000 g
346 m
Filament Print & Drying settings
| Nozzle temp | 210–230 °C |
|---|---|
| Bed temp | 25–60 °C |
| Print speed | 20–40 mm/s |
| Flow ratio | 1.03 |
| Drying | 40-50 °C for 6-8 h |
| Moisture sensitivity | High |
| Enclosure | Not Required |
| Part cooling | Medium |
| Dry box while printing | Keep the spool in a dry box while printing |
More in the 95A series
View all 18 colors
Blue
Brown
Digital Blue
Green
Light Green
Matte Black
Matte Gray
Matte Natural
Matte Orange
Matte Space Gray
Matte White
Matte Yellow
Neon Green
Neon Orange
Neon Red
Purple
RedReviews for Overture TPU 95A Bright Pink filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.