View

Army Green· Prusament PLA

Name: Prusament PLA Army Green
Brand: Prusament

Prusament

Basic

Ease of use Very easy

Beginner-friendly. Prints reliably at default settings on almost any printer.

Filament Color

Army Green#1E8C1E

Your spools

Create your studio Sign in

Prusament PLA Army Green Summary

This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.

Print characteristics

Layer adhesion GoodBed adhesion ModerateBridging & overhang ExcellentSpeed sensitivity ModerateWarping LowShrinkage 0.2-0.6 %Stringing LowOozing LowOdor Mild

Strengths

Solid strength for everyday parts
Stiff and rigid, resists flexing
Stays flat, very little warping
Prints clean with minimal stringing
Food-safe potential with the right setup

Things to watch

Softens in heat, not for hot cars or near heat sources
Degrades in sunlight, not ideal for long-term outdoor use
Can be brittle, may crack under sharp impact
Wears down under friction, not for high-wear parts

Drying

This material is fairly forgiving about moisture. When it needs drying, run it at 40-50 °C for 4-6 h.

Compatibility

ENCLOSURE

Not Required

PART COOLING

Max

NOZZLE TEMP

195–215 °C

BED TEMP

50–60 °C

Color

A solid Army Green filament. It reads as a vivid green, close to forest green.

Finishing

SandablePaintableVapor-smoothableMachinableGlue-friendly

Common uses

🎨 Art & Cosplay Display modelsFigurines & statues

🏡 Home Drawer organizersPlanters

🎲 Gaming Board game insertsMiniatures

Specialties

BasicDefault finish with no special surface treatment; slight natural sheen. Prints with a slightly glossy surface and visible layer lines, and is the baseline against which all other finishes are compared.