Bambu Lab PET CF
Filaments in this series
1.75 mm
1000 g
1.29 g/cm³
322 m
260–290 °C
80–100 °C
0.95
Drying: 65-75 °C for 4-6 h
Material properties · 25 fields
Inherited from PET.
Printing requirements
250-270 °C
60-90°C
Off
Off
Ambient (20-35°C), Warm (35-55°C) · enclosure needed
Medium
Open Window / Room Ventilation, Carbon Filtration
Dilutes airborne contaminants but doesn't filter them. Reduces VOCs and odors but not ultrafine particles.
0.95
Recommended (Brim, Glue (release))
Required
Recommended (for taller or longer prints)
65-75 °C for 4-6 h
Printing characteristics
0.2-0.7 %
60 mm/s
Medium
Material properties
1.38 g/cm³
Medium · 55 MPa
High · 2.70 GPa
Low · 4.0 kJ/m²
Rigid · 30% elong.
Medium · 70 °C HDT
75 °C
Low · 0.30% in 24h
Medium · 80 MPa
High · 2.70 GPa
Series created Jun 4, 2026
Specialties
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Heat ResistantWithstands elevated temperatures (hot car, warm electronics) without deforming. Printable on standard printers. HDT ~80-120°C.
Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.
RecycledMade from recycled plastic waste or renewable sources. Lowers environmental impact. For eco-conscious projects.
Food SafeCertified safe for touching food. No toxic heavy metals or harmful additives. For kitchen tools, food containers, or utensils. Note: Layer lines can trap bacteria, so use with caution.
Low ShrinkagePart holds its exact shape over time. No warping, sagging, or unexpected size changes. Essential for precision parts, press-fits, and mechanisms under constant load.
High StrengthResists bending or pulling apart under heavy load. Very stiff.
Wear ResistantResists surface wear from friction and sliding. Good for gears, bushings, conveyor parts, or any component that rubs against other surfaces.
Low OdorEngineered to reduce harmful emissions and smells during printing. Safer for home or office use without industrial ventilation. Most common in ABS and ASA alternatives.