Bambu Lab PETG HF
Filaments in this series
1.75 mm
1000 g
1.27 g/cm³
327 m
230–260 °C
65–75 °C
0.98
Drying: 60-65 °C for 4-6 h
Material properties · 52 fields
Inherited from PETG.
Printing requirements
230-250 °C
60-90°C
Medium 50%
Off
Ambient (20-35°C), Warm (35-55°C) · enclosure needed
Low
Open Window / Room Ventilation
Dilutes airborne contaminants but doesn't filter them.
0.98
Optional (Brim, Glue (release), Magigoo)
Recommended
Recommended (for taller or longer prints)
60-65 °C for 4-6 h
Printing characteristics
Process-Dependentⓘ
Low
0.2-0.8 %
Moderate
Exceptionalⓘ
Fairⓘ
Moderateⓘ
Moderateⓘ
Highⓘ
120 mm/s
Medium
None
Medium
Material properties
1.27 g/cm³
Medium · 48 MPa
Medium · 2.00 GPa
Medium · 7.0 kJ/m²
Rigid · 20% elong.
Medium · 68 °C HDT
80 °C
Low · 0.20% in 24h
Medium · 70 MPa
Medium · 2.00 GPa
Good
Excellent
Fair
Good
Fair
Excellent
Good
Good
Medium 70-80D
None
With proper processing
Post-processing
Fair
Fair
No
Excellent
Fair
Not recommended
Series created Jun 4, 2026
Specialties
High SpeedFlows like water, cools instantly. Prints fast (200mm/s+) without clogging. Usually matte finish.
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
Heat ResistantWithstands elevated temperatures (hot car, warm electronics) without deforming. Printable on standard printers. HDT ~80-120°C.
UV ResistantResists degradation from sunlight exposure (UV radiation) and outdoor weather conditions. For outdoor signage, garden equipment, automotive exterior parts, or marine components.
Low OdorEngineered to reduce harmful emissions and smells during printing. Safer for home or office use without industrial ventilation. Most common in ABS and ASA alternatives.
Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.