Black Blue· AMOLEN PLA Silk Basic

AMOLEN

Filament Color

Black Blue#3A3F53

Buy

AMOLEN Store

Buy links may earn VisualSpool a small commission, at no extra cost to you. Details.

Your spools

Create your studio Sign in

Photos

No community photos of AMOLEN PLA Silk Basic Black Blue yet.

Upload your swatch, spool or print with this filament.

Join to add a photo or sign in

AMOLEN PLA Silk Basic Black Blue Summary

This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.

Skill level Beginner

Beginner-friendly. Prints reliably at default settings on almost any printer.

Print characteristics

Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild

Strengths

Solid strength for everyday parts
Stiff and rigid, resists flexing
Stays flat, very little warping
Prints clean with minimal stringing
Food-safe potential with the right setup

Things to watch

Softens in heat, not for hot cars or near heat sources
Degrades in sunlight, not ideal for long-term outdoor use
Can be brittle, may crack under sharp impact
Wears down under friction, not for high-wear parts

Color & finish

A solid Black Blue filament. It reads as a dark, muted black, close to dark slate gray. This filament has a silky, high-gloss sheen.

Finishing

SandablePaintableVapor-smoothableMachinableGlue-friendly

Common uses

Decor & Cosplay Display modelsFigurines & statues

Home & Lifestyle Drawer organizersPlanters

Tabletop & Gaming Board game insertsMiniatures

Specialties

SilkExtremely smooth and glossy with a satin-like sheen. Color is static and highly reflective.

Spool Specs

DENSITY

1.27 g/cm³

TOLERANCE

±0.02 mm

DIAMETER

1.75 mm

SPOOL SIZE

1000 g

LENGTH

327 m

Filament Print & Drying settings

Nozzle temp	210–240 °C
Bed temp	30–65 °C
Print speed	< 500 mm/s
Flow ratio	1
Drying	55 °C for 8 h
Moisture sensitivity	Low
Enclosure	Not Required
Part cooling	Max