Bronze Green· AMOLEN PLA Silk Basic
Updated Jun 27, 2026
MetallicSilk
Very easy
Beginner-friendly. Prints reliably at default settings on almost any printer.
Sign up to follow this filament
Your spools, shelves, and drying logs, all in one visual studio.
$22.99/kg
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
AMOLEN PLA Silk Basic Bronze Green Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Print characteristics
Layer adhesion GoodBed adhesion ModerateBridging & overhang ExcellentSpeed sensitivity ModerateWarping LowShrinkage 0.2-0.6 %Stringing LowOozing LowOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Drying
This material is fairly forgiving about moisture. When it needs drying, run it at 40-50 °C for 4-6 h.
Compatibility
Not Required
Max
210–240 °C
30–65 °C
Color
A solid Bronze Green filament. It reads as a metallic, close to olive drab.
Finish
This filament has a silky, high-gloss sheen and a metallic look.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
🎨 Art & Cosplay
Display modelsFigurines & statues
🏡 Home
Drawer organizersPlanters
🎲 Gaming
Board game insertsMiniatures
Specialties
MetallicShiny and reflective like polished metal. The color stays the same from every angle. Contains no metal.
SilkExtremely smooth and glossy with a satin-like sheen. Color is static and highly reflective.
Spool Specs
1.27 g/cm³
±0.02 mm
1.75 mm
1000 g
327 m
Filament Print & Drying settings
| Nozzle temp | 210–240 °C |
|---|---|
| Bed temp | 30–65 °C |
| Print speed | < 500 mm/s |
| Flow ratio | 1 |
| Drying | 55 °C for 8 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
More in the Silk Basic series
View all 19 colors
Aged Brass
Baby Blue
Black
Black Blue
Coffee Gold
Cucumber Green
Fluoro Yellow
Gold
Ice Blue
Mercury Silver
Neon Green
Pink
Purple
Red Copper
Sakura Pink
Sapphire Blue
Silver Grey
WhitePhotos
No community photos of AMOLEN PLA Silk Basic Bronze Green yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inReviews for AMOLEN PLA Silk Basic Bronze Green filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.