Updated Jun 27, 2026Added Jun 6, 2026
Black & Green· AMOLEN PLA Silk Shiny Gradient
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of AMOLEN PLA Silk Shiny Gradient Black & Green yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inAMOLEN PLA Silk Shiny Gradient Black & Green Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Beginner
Beginner-friendly. Prints reliably at default settings on almost any printer.
Print characteristics
Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Color & finish
This is a multi-color filament in Silk Black and Shiny Green. This filament has a silky, high-gloss sheen, embedded glitter that catches the light, and a color-shifting gradient as it prints.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Decor & Cosplay
Display modelsFigurines & statues
Home & Lifestyle
Drawer organizersPlanters
Tabletop & Gaming
Board game insertsMiniatures
Specialties
GalaxyDark base (black, deep blue, dark purple) with extremely fine, dense sparkles. Creates a starry-night effect. Specks are tiny and numerous, not individually prominent.
SilkExtremely smooth and glossy with a satin-like sheen. Color is static and highly reflective.
GradientThe color transitions as the print progresses. One spool can start blue and end pink, or cycle through a full rainbow.
Spool Specs
1.28 g/cm³
±0.02 mm
1.75 mm
1000 g
325 m
Filament Print & Drying settings
| Nozzle temp | 210–240 °C |
|---|---|
| Bed temp | 30–65 °C |
| Print speed | < 200 mm/s |
| Flow ratio | 1 |
| Drying | 55 °C for 8 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
| Part cooling | Max |
More in the Silk Shiny Gradient series
View all 14 colors
Azure Blue
Black & Blue
Black & Fuchsia
Black & Purple
Black & Red
Black Red Purple
Black Red Gold
Black Yellow Green
Blue Green Purple
Blue Purple Red
Gold & Purple
Red & Gold
Silver & BlueReviews for AMOLEN PLA Silk Shiny Gradient Black & Green filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.