Updated Jul 27, 2026Added Jun 6, 2026
Unicorn· CookieCad PLA Elixir
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of CookieCad PLA Elixir Unicorn yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inCookieCad PLA Elixir Unicorn Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Beginner
Beginner-friendly. Prints reliably at default settings on almost any printer.
Print characteristics
Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Color & finish
This is a multi-color filament in Blue, Purple, and Pink. This filament has a color-shifting gradient as it prints.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Decor & Cosplay
Display modelsFigurines & statues
Home & Lifestyle
Drawer organizersPlanters
Tabletop & Gaming
Board game insertsMiniatures
Specialties
GradientThe color transitions as the print progresses. One spool can start blue and end pink, or cycle through a full rainbow.
ShimmerFine mica powder particles that catch the light, creating a subtle or intense sparkle.
Slow GradientColor changes so gradually you might not notice until you compare the first print to the last print on the spool.
Spool Specs
1.24 g/cm³
±0.03 mm
1.75 mm
1000 g
335 m
Filament Print & Drying settings
| Nozzle temp | 195–220 °C |
|---|---|
| Bed temp | 35–65 °C |
| Flow ratio | 1 |
| Drying | 40-50 °C for 4-6 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
| Part cooling | Max |
More in the Elixir series
View all 7 colors
Reviews for CookieCad PLA Elixir Unicorn filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.