Witchcraft· CookieCad PLA Elixir
This is Witchcraft - it is shiny, iridescent, and shimmery with a purple base. It is a strong and glossy filament and prints with a beautiful shine.
Beginner-friendly. Prints reliably at default settings on almost any printer.
CookieCad PLA Elixir Witchcraft Summary
Witchcraft is a shiny, iridescent PLA with a purple base that shimmers and shifts as the light hits it. It prints with a glossy, almost magical finish that gives models a striking, high-end look right off the bed, no post-processing needed.
Unlike the glitter Star Stuff filaments, Witchcraft is a standard PLA that prints without any elevated clog risk, making it a great choice if you want something visually dramatic but easy to work with.
Print characteristics
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Drying
This material is fairly forgiving about moisture. When it needs drying, run it at 40-50 °C for 4-6 h.
Compatibility
Color
A solid Witchcraft filament. It reads as a vivid purple, close to blue violet.
Finishing
Common uses
Specialties
Spool Specs
Filament Print & Drying settings
| Nozzle temp | 195–220 °C |
|---|---|
| Bed temp | 35–65 °C |
| Flow ratio | 1 |
| Drying | 40-50 °C for 4-6 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
More in the Elixir series
View all 7 colors
Reviews for CookieCad PLA Elixir Witchcraft filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.