Updated Jul 8, 2026Added Jul 8, 2026
Alpine Forest· Overture PLA Rock
Updated Jul 8, 2026
StoneMatte
Beginner
Beginner-friendly. Prints reliably at default settings on almost any printer.
Sign up to follow this filament
Your spools, shelves, and drying logs, all in one visual studio.
$23.99/kg
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Photos of Alpine Forest · Overture PLA Rock
Photos
No community photos of Overture PLA Rock Alpine Forest yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inYour spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Overture PLA Rock Alpine Forest Summary
This filament is beginner-friendly to print. Worth watching: it can be low on heat resistance.
Print characteristics
Layer adhesion GoodBed adhesion EasyBridging & overhang ExcellentSpeed sensitivity LowWarping NoneShrinkage 0.2-0.6 %Stringing MinimalOozing MinimalOdor Mild
Strengths
- Solid strength for everyday parts
- Stiff and rigid, resists flexing
- Stays flat, very little warping
- Prints clean with minimal stringing
- Food-safe potential with the right setup
Things to watch
- Softens in heat, not for hot cars or near heat sources
- Degrades in sunlight, not ideal for long-term outdoor use
- Can be brittle, may crack under sharp impact
- Wears down under friction, not for high-wear parts
Color & finish
A solid Alpine Forest filament. It reads as a brown, close to dim gray. This filament has a flat, matte finish that hides layer lines and a stone-like marbled effect.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Decor & Cosplay
Display modelsFigurines & statues
Home & Lifestyle
Drawer organizersPlanters
Tabletop & Gaming
Board game insertsMiniatures
Specialties
StoneEarth-tone base (gray, beige, tan, brown, terracotta) with matching or contrasting speckles. Creates a raw, natural rock or clay appearance. May contain actual stone powder.
MatteFlat, non-reflective surface that hides layer lines. Surface feels slightly rough or chalky.
Spool Specs
1.37 g/cm³
±0.02 mm
1.75 mm
1000 g
303 m
Filament Print & Drying settings
| Nozzle temp | 190–230 °C |
|---|---|
| Bed temp | 50–70 °C |
| Print speed | 60–300 mm/s |
| Flow ratio | 1 |
| Drying | 50 °C for 7 h |
| Moisture sensitivity | Low |
| Enclosure | Not Required |
| Part cooling | Max |
More in the Rock series
View all 5 colors
Reviews for Overture PLA Rock Alpine Forest filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.