Updated Jul 9, 2026Added Jul 9, 2026
Clear· Overture TPU High Speed TPU 95A
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos of Clear · Overture TPU High Speed TPU 95A
Photos
No community photos of Overture TPU High Speed TPU 95A Clear yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inOverture TPU High Speed TPU 95A Clear Summary
This filament is moderately demanding to print, flexible. Worth watching: it can be moisture-sensitive and low on heat resistance.
Moderate
Moderate. Prints well once temperature, cooling, and bed adhesion are dialed in.
Print characteristics
Layer adhesion ExceptionalBed adhesion EasyBridging & overhang FairSpeed sensitivity Very HighWarping NoneShrinkage 0.5-1.5 %Stringing HighOozing ModerateOdor Mild
Strengths
- Solid strength for everyday parts
- Wear-resistant for moving and rubbing parts
- Flexible and rubber-like
- Layers bond strongly for clean, watertight prints
- Stays flat, very little warping
- Food-safe potential with the right setup
Things to watch
- Soaks up moisture quickly, keep it sealed and dry before printing
- Prone to stringing, tune retraction and keep the filament dry
- Softens in heat, not for hot cars or near heat sources
- Shrinks as it cools, which can affect dimensional accuracy
Color & finish
A solid Clear filament. It reads as a very pale clear, close to alice blue. This filament has a translucent, light-diffusing look.
Common uses
Mechanical & Structural
Bushings & bearings
Electronics & RC
Drone framesRC car parts
Specialties
TranslucentFrosted glass effect. Light passes through, but objects on the other side look blurry. Great for lampshades, signs, and diffusers
High SpeedFlows like water, cools instantly. Prints fast (200mm/s+) without clogging. Usually matte finish.
Flexible / ElasticStretches and squishes like rubber. High stretch, very soft. Returns to shape. For phone cases, gaskets, soft grips, shock absorption.
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
Wear ResistantResists surface wear from friction and sliding. Good for gears, bushings, conveyor parts, or any component that rubs against other surfaces.
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Low Friction Naturally slippery surface. Low coefficient of friction. For bearings and sliding parts.
Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.
Spool Specs
1.19 g/cm³
±0.03 mm
1.75 mm
1000 g
349 m
Filament Print & Drying settings
| Nozzle temp | 200–240 °C |
|---|---|
| Bed temp | 25–60 °C |
| Print speed | 60–90 mm/s |
| Flow ratio | 1.03 |
| Drying | 70 °C for 7 h |
| Moisture sensitivity | High |
| Enclosure | Not Required |
| Part cooling | Medium |
| Dry box while printing | Keep the spool in a dry box while printing |
More in the High Speed TPU 95A series
View all 20 colors
Black
Grass Green
Gray
Luminous Blue
Luminous Electric Indigo
Luminous Green
Luminous Orange
Luminous Pink
Neon Magenta
Neon Yellow
Orange
Pastel Rose
Pink
Translucent Blue
Translucent Green
Translucent Orange
Translucent Purple
Translucent Red
WhiteReviews for Overture TPU High Speed TPU 95A Clear filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.