View

Transl Blue· Overture TPU

Name: Overture TPU Transl Blue
Brand: Overture

High SpeedFlexible / ElasticTough / Impact ResistantWear ResistantChemical ResistantLow Friction Water Resistant / Hydrophobic

Ease of use Moderate

Moderate. Prints well once temperature, cooling, and bed adhesion are dialed in.

Filament Color

Translucent Blue#386DFF

Buy

Overture Store

Buy links may earn VisualSpool a small commission, at no extra cost to you. Details.

Your spools

Create your studio Sign in

Overture TPU Transl Blue Summary

This filament is moderately demanding to print, flexible. Worth watching: it can be moisture-sensitive and low on heat resistance.

Print characteristics

Layer adhesion ExceptionalBridging & overhang PoorSpeed sensitivity Very HighWarping NoneShrinkage 0.5-1.5 %Stringing ModerateOozing ModerateOdor None

Strengths

Solid strength for everyday parts
Wear-resistant for moving and rubbing parts
Flexible and rubber-like
Layers bond strongly for clean, watertight prints
Stays flat, very little warping
Food-safe potential with the right setup

Things to watch

Soaks up moisture quickly, keep it sealed and dry before printing
Softens in heat, not for hot cars or near heat sources
Shrinks as it cools, which can affect dimensional accuracy
Struggles with bridges and steep overhangs without supports

Drying

This material is very hygroscopic, it pulls moisture from the air quickly. When it needs drying, run it at 40-50 °C for 6-8 h. Keep it in a heated dry box while printing for the cleanest results.

Compatibility

ENCLOSURE

Not Required

PART COOLING

Medium

WHILE PRINTING

Keep in a dry box

NOZZLE TEMP

210–230 °C

BED TEMP

30–60 °C

Color

Transl Blue prints in Translucent Blue. It reads as a light, vivid blue, close to royal blue.

Common uses

⚙️ Mechanical Bushings & bearings

⚡ Electronics Drone framesRC car parts

Specialties

High SpeedFlows like water, cools instantly. Prints fast (200mm/s+) without clogging. Usually matte finish.

Flexible / ElasticStretches and squishes like rubber. High stretch, very soft. Returns to shape. For phone cases, gaskets, soft grips, shock absorption.

Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.

Wear ResistantResists surface wear from friction and sliding. Good for gears, bushings, conveyor parts, or any component that rubs against other surfaces.

Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.

Low Friction Naturally slippery surface. Low coefficient of friction. For bearings and sliding parts.

Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.