AMOLEN PLA Silk S-Series
Filaments in this series
Amber SeaBerry PopBlack Blue PurpleBlack Pink WhiteBlack RedBlack Red YellowBlack Turquoise MagentaBlue GreenBlue Pink GreenBlue Pink WhiteBlue Red Yellow GreenGold Purple RedGreen FuchsiaNebula RibbonRed WhiteTwilight
1.75 mm
1000 g
1.29 g/cm³
322 m
210–240 °C
30–65 °C
1
Drying: 55 °C for 8 h
Material properties · 53 fields
Inherited from PLA.
Printing requirements
195-220 °C
Off, 40-60°C
Max 100%
Off
Ambient (20-35°C)
Low
Open Window / Room Ventilation
Dilutes airborne contaminants but doesn't filter them.
1
Optional (Brim)
Optional
Not needed
40-50 °C for 4-6 h
Printing characteristics
Consistentⓘ
Low
0.2-0.6 %
Moderateⓘ
Easy
Goodⓘ
Excellentⓘ
Lowⓘ
Lowⓘ
Moderateⓘ
150 mm/s
Low
Mild
Low
Material properties
1.24 g/cm³
Medium · 50 MPa
High · 3.50 GPa
Low · 3.0 kJ/m²
Rigid · 5% elong.
Low · 55 °C HDT
60 °C
Medium · 0.50% in 24h
Medium · 80 MPa
High · 3.60 GPa
Poor
Poor
Poor
Poor
Poor
Good
Fair
Poor
Hard 80-90D
Partial
With proper processing
Post-processing
Good
Good
Limited (Ethyl acetate)
Good
Good
Possible
Series created Jun 4, 2026 · Last updated Jun 26, 2026
Specialties
SilkExtremely smooth and glossy with a satin-like sheen. Color is static and highly reflective.
GradientThe color transitions as the print progresses. One spool can start blue and end pink, or cycle through a full rainbow.
Fast GradientThe color cycles every few inches of filament. A single small print will show several distinct colors.