Added Jun 6, 2026
Black· Bambu Lab ABS GF
AMS compatible
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of Bambu Lab ABS GF Black yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inBambu Lab ABS GF Black Summary
This filament is tricky to print, heat-resistant. Worth watching: it can be prone to warping and a bit smelly to print.
Advanced
Advanced. Wants careful tuning, strong bed adhesion, and usually an enclosure.
Print characteristics
Layer adhesion ExcellentBed adhesion ChallengingBridging & overhang GoodSpeed sensitivity ModerateWarping HighShrinkage 0.4-0.8 %Stringing LowOozing LowOdor Strong
Strengths
- Solid strength for everyday parts
- Handles heat well
- Layers bond strongly for clean, watertight prints
- Prints clean with minimal stringing
- Good electrical insulator
Things to watch
- Prone to warping, use a heated bed and ideally an enclosure
- Degrades in sunlight, not ideal for long-term outdoor use
- Gives off noticeable fumes, print with ventilation or filtration
- Fussy about bed adhesion, use a brim, glue, or a textured plate
Color & finish
A solid Black filament. It reads as a near-black, close to midnight blue. This filament has a flat, matte finish that hides layer lines.
Finishing
SandablePaintableVapor-smoothableMachinableGlue-friendly
Common uses
Mechanical & Structural
GearsSnap-fit enclosures
Outdoor & Auto
Automotive partsCar interior accessories
Electronics & RC
Electronics enclosures
Specialties
MatteFlat, non-reflective surface that hides layer lines. Surface feels slightly rough or chalky.
High StrengthResists bending or pulling apart under heavy load. Very stiff.
Heat ResistantWithstands elevated temperatures (hot car, warm electronics) without deforming. Printable on standard printers. HDT ~80-120°C.
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
Vapor SmoothableReacts to chemical vapors (acetone for ABS/ASA, or other solvents) that partially melt the surface. Creates a glossy, injection-molded finish with no layer lines.
SandableEasily sanded, filed, or carved without gumming up sandpaper.
Spool Specs
1.08 g/cm³
±0.03 mm
1.75 mm
1000 g
385 m
Filament Print & Drying settings
| Nozzle temp | 240–270 °C |
|---|---|
| Bed temp | 80–100 °C |
| Print speed | < 180 mm/s |
| Flow ratio | 0.97 |
| Drying | 60-70 °C for 2-4 h |
| Moisture sensitivity | Low |
| Enclosure | Required |
| Part cooling | None |
| Dry box while printing | Keep the spool in a dry box while printing |
More in the GF series
View all 6 colors
Reviews for Bambu Lab ABS GF Black filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.