Black· 3DXTech PC CarbonX ezPC+CF
Updated Jul 7, 2026
Carbon FiberHigh StrengthHeat ResistantTough / Impact ResistantTransparentFlame RetardantUV Resistant
Expert
Expert. Best suited to experienced makers: enclosure, precise temps, and patience.
Sign up to follow this filament
Your spools, shelves, and drying logs, all in one visual studio.
$140.00/kg
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Photos
No community photos of 3DXTech PC CarbonX ezPC+CF Black yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inYour spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
3DXTech PC CarbonX ezPC+CF Black Summary
This filament is demanding to print, strong and heat-resistant. Worth watching: it can be prone to warping and moisture-sensitive.
Print characteristics
Layer adhesion ExcellentBed adhesion Requires Special PrepBridging & overhang FairSpeed sensitivity HighWarping HighShrinkage 0.5-0.8 %Stringing ModerateOozing ModerateOdor Moderate
Strengths
- Strong parts that hold up under load
- Tough, absorbs impact without cracking
- Handles heat well
- Layers bond strongly for clean, watertight prints
Things to watch
- Prone to warping, use a heated bed and ideally an enclosure
- Soaks up moisture quickly, keep it sealed and dry before printing
- Gives off noticeable fumes, print with ventilation or filtration
- Fussy about bed adhesion, use a brim, glue, or a textured plate
Color & finish
A solid Black filament. It reads as a near-black, close to midnight blue. This filament has a clear, see-through look and a textured matte surface from carbon-fiber fill.
Specialties
Carbon FiberContains chopped carbon fibers in a base polymer (PLA, ABS, Nylon, PETG, ASA). Creates extremely stiff, lightweight, dimensionally stable parts. Matte black finish only. Highly abrasive.
High StrengthResists bending or pulling apart under heavy load. Very stiff.
Heat ResistantWithstands elevated temperatures (hot car, warm electronics) without deforming. Printable on standard printers. HDT ~80-120°C.
Tough / Impact ResistantEngineered to resist breaking, cracking, or shattering under impact. Unlike standard PLA, which snaps, this flexes slightly before breaking. Ideal for parts that get dropped, bumped, or stressed.
TransparentOptically clear. You can see fine details through the print. Very difficult to achieve true transparency with FDM due to layer lines.
Flame RetardantResists catching fire or self-extinguishes. Often UL94 rated. For electrical enclosures, automotive components, aerospace parts, or safety-critical applications.
UV ResistantResists degradation from sunlight exposure (UV radiation) and outdoor weather conditions. For outdoor signage, garden equipment, automotive exterior parts, or marine components.
Spool Specs
1.36 g/cm³
±0.03 mm
1.75 mm
500 g
153 m
Filament Print & Drying settings
| Nozzle temp | 260–280 °C |
|---|---|
| Bed temp | 80–100 °C |
| Nozzle size | 0.4 mm+ |
| Flow ratio | 0.95 |
| Nozzle | Hardened / abrasive-resistant nozzle required |
| Drying | 80 °C for 4 h |
| Moisture sensitivity | High |
| Enclosure | Required |
| Part cooling | None, Low |
| Dry box while printing | Keep the spool in a dry box while printing |
More from 3DXTech
View all 78
Alpine Green
Apple Green
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Blue
Blue Ocean
Blue Transparent
Brown
Cactus Green
Chocolate Wine
Clear
Dark Blue
Dark Blue
Dark Green
Dark Grey+53
moreReviews for 3DXTech PC CarbonX ezPC+CF Black filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.