Added Jun 6, 2026
Black· Bambu Lab PPS CF
Buy links may earn VisualSpool a small commission, at no extra cost to you.
Details.
Your spools
Sign in to see your spools of this filament here, how much is left, and where each one lives.
Photos
No community photos of Bambu Lab PPS CF Black yet.
Upload your swatch, spool or print with this filament.
Join to add a photo
or sign inBambu Lab PPS CF Black Summary
This filament is demanding to print, strong and heat-resistant. Worth watching: it can be prone to warping and a little moisture-sensitive.
Expert
Expert. Best suited to experienced makers: enclosure, precise temps, and patience.
Print characteristics
Layer adhesion ExcellentBed adhesion Requires Special PrepBridging & overhang GoodSpeed sensitivity Very HighWarping HighShrinkage 0.6-1.5 %Stringing LowOozing LowOdor Strong
Strengths
- Strong parts that hold up under load
- Stiff and rigid, resists flexing
- Handles heat well
- Holds up to sunlight without fading or going brittle
- Weather-resistant for long-term outdoor use
- Resists oils, solvents, and chemicals
- Layers bond strongly for clean, watertight prints
- Prints clean with minimal stringing
Things to watch
- Prone to warping, use a heated bed and ideally an enclosure
- Picks up moisture over time, store it with desiccant
- Gives off noticeable fumes, print with ventilation or filtration
- Shrinks as it cools, which can affect dimensional accuracy
- Can be brittle, may crack under sharp impact
- Fussy about bed adhesion, use a brim, glue, or a textured plate
Color & finish
A solid Black filament. It reads as a near-black, close to midnight blue.
Specialties
Heat ResistantWithstands elevated temperatures (hot car, warm electronics) without deforming. Printable on standard printers. HDT ~80-120°C.
Flame RetardantResists catching fire or self-extinguishes. Often UL94 rated. For electrical enclosures, automotive components, aerospace parts, or safety-critical applications.
Water Resistant / HydrophobicResists absorbing water or moisture from the air. Maintains mechanical properties in humid or wet environments. For marine parts, outdoor components, or wet environment applications.
High TemperatureWithstands extreme heat (150°C+) for industrial, aerospace, and engine-adjacent applications. Requires specialized high-temp printers (300°C+ hotend, enclosure).
Chemical ResistantResists damage from oils, fuels, acids, industrial chemicals or solvents. For laboratory equipment, fuel system components, or chemical storage.
High StrengthResists bending or pulling apart under heavy load. Very stiff.
Wear ResistantResists surface wear from friction and sliding. Good for gears, bushings, conveyor parts, or any component that rubs against other surfaces.
Low ShrinkagePart holds its exact shape over time. No warping, sagging, or unexpected size changes. Essential for precision parts, press-fits, and mechanisms under constant load.
Fatigue ResistantWithstands repeated bending without cracking. For living hinges, snap-fits, and moving parts.
Spool Specs
1.26 g/cm³
±0.03 mm
1.75 mm
1000 g
330 m
Filament Print & Drying settings
| Nozzle temp | 310–340 °C |
|---|---|
| Bed temp | 100–120 °C |
| Print speed | < 100 mm/s |
| Flow ratio | 0.94 |
| Drying | 120-150 °C for 4-6 h |
| Moisture sensitivity | Medium |
| Enclosure | Required |
| Part cooling | None |
| Dry box while printing | Keep the spool in a dry box while printing |
More from Bambu Lab
View all 265
Absolute Black
Alpine Green
Apple Green
Apricot
Arctic Whisper
Ash Gray
Aurora Purple
Azure
Baby Blue
Baby Blue
Bambu Green
Bambu Green
Beige
Beige
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black+240
moreReviews for Bambu Lab PPS CF Black filament
Be the first to review. Join for free or sign in to share your experience and prints with this filament.